Looking to contact a frugal Knoxville chimney sweep now? Look no further. Clear Chimney is your one stop solution for everything fireplace and chimney.
When cold weather sets in, the fireplace is an essential heating source for many people. Furthermore, electric heat or natural gas prices are rising rapidly, many homeowners are going back to the tried and true method of wood burning fireplaces or stoves.
Unfortunately, some chimneys are too far gone to repair. This could be a $10,000 project to repair or replace a chimney that is clogged up. It doesn’t have to be expensive really.
The are steps a Knoxville chimney sweep company takes for each project.
The first step to cleaning a chimney removes any furniture and articles from the hearth area. Many customers have rugs and valuable items on the mantle. The cleaning process is messy. There is no reason to not take the proper steps in setting up a proper chimney sweep.
The second step is enclosing the opening with plastic sheeting. The vacuum system will pull any debris out of the chimney. For example, no soot will enter the house if this is done correctly. Our vacuums contain HEPA filters for high efficiency particle trapping.
While tackling the chimney, consider these related tasks to ensure your home remains in top condition:
Roof Cleaning: Keeping your roof free of debris can prevent blockages and damage.
Roofing: Regular inspections and maintenance ensure your roof stays leak-free and durable.
Gutter Cleaning: Clear gutters prevent water damage and maintain proper drainage.
Chimney Repair: Address any structural issues to maintain safety and efficiency.
Gutter Repair and Replacement: Ensure your gutters are functioning properly to protect your home from water damage.
You can ensure your home is well-maintained and running efficiently, preventing future issues and preserving its value by addressing these tasks alongside chimney sweeping.
The chimney sweeping pushes soot, clogs and debris down from the chimney cap. The vacuum system pulls the particles into the HEPA filters. The soot is contained and trapped.
The bottom of the fireplace is cleaned once the chimney cap and flue are swept. The plastic is removed. Also, any furniture, rugs or items are relocated into their former place.
In addition, we teach each homeowner how to maintain their fireplace. Most people do not understand the need to clean a chimney every year.
How much wood do you burn a year?
The average fireplace uses 1 to 2 cords of wood a year. Burning wood regularly creates exhaust that can deposit creosote. Many homeowners hire a Knoxville chimney sweep to clean AFTER the winter season. The smell of burnt wood can creep into the house over the summer.
Also, be sure to only buy dried wood. Wet wood increases residue in the chimney flue. Above all, dried wood is the only way to go for creating a fire.
When it comes to hiring a chimney sweep, making an informed choice is crucial for ensuring the safety and efficiency of your fireplace.
Here’s a step-by-step guide to help you find a qualified and trusted chimney sweep in your area:
Research and Recommendations: Start by asking friends and family for recommendations. Personal experiences can provide valuable insights into a service provider’s reliability and professionalism.
Verify Credentials: Ensure the chimney sweep is certified by a recognized chimney safety organization. Certification often indicates that the sweep has undergone extensive training and adheres to industry standards.
Check Reviews and Reputation: Look up reviews online to gauge the reputation of the chimney sweep. Consistent positive feedback is a good indicator of quality service.
Request References: Don’t hesitate to ask for references from past clients. Speaking directly with previous customers can confirm the quality of work and customer satisfaction.
Get Multiple Quotes: While price shouldn’t be the only factor, obtaining multiple quotes can help you understand the market rate and avoid overpaying.
Finally, when choosing a Knoxville chimney sweep, quality, reputation and reliability win over “cheapest price” every time. Also, Clear Chimney is proud to serve east Tennessee. Locally owned. Clear Chimney never leaves you hanging for your fireplace and chimney needs.
In conclusion, following these steps will help ensure you hire a chimney sweep who not only meets your budget but also delivers exceptional service.
Creosote buildup on chimney cap is very dangerous. This highly combustible soot tar mixture is devastating during a chimney fire. Clean it up as soon as possible.
This is an actual customer’s chimney cap completely covered in creosote build up. Years of wood burning without a professional chimney sweep allowed this buildup to happen. It is amazing any smoke or fumes were leaving this chimney at all.
A chimney fire caused by creosote buildup near the chimney cap.
Burning more than a cord or rick of wood a year will develop a creosote buildup left unattended over the years. This tar like substance is very flammable. Cleaning and sweeping this out is NOT a do-it-yourself weekend warrior job. The chimney is often high off of the ground. The roof pitch is not easy to walk on for most people.
Our customers tell us the biggest reason they hire out the chimney inspection and cleaning is fear of heights and their safety. When cleaning the creosote buildup on a chimney cap, our team always wears a 5 point safety vest and safety glasses with cut proof hand gloves.
While professional cleaning is recommended, understanding the basics of chimney cap maintenance is beneficial. Regularly inspect your chimney cap and liner, and ensure that you verify the moisture content of your ‘seasoned hardwoods.’ The cap will naturally darken over time due to soot accumulation. However, ensuring the liner remains clean is a good indicator that your wood-burning stove is running efficiently.
Want to do it yourself?
For those who prefer a hands-on approach, here’s a simple check:
Inspect: Look for signs of wear or excessive creosote buildup.
Clean: If safe to do so, gently tap the cap to dislodge loose soot or ash. However, be cautious and prioritize safety.
The best option is completely removing and replacing the chimney cap with a new stainless steel custom chimney cap. Designed, cut, installed and sealed, a new chimney cap will serve your home for decades. Creosote is simply too hard and dangerous to remove completely.
When dealing with an excessively dirty or clogged chimney cap, it’s important to take a comprehensive approach to ensure both safety and efficiency.
However, before making this investment, it’s crucial to understand how chimney cap design can influence creosote and soot accumulation. An unusually cold winter with strong winds can strip heat from the cap, causing gases to condense and creosote to build up. If your current cap is crudded up more than the flue, it might be due to these harsh environmental conditions.
Consider the design of your existing cap. Some models feature tight screen mesh spark arrestors, which are notorious for clogging. If your cap design also allows snow to collect, this can further contribute to accumulation issues.
Ultimately, assessing the state of your chimney and its cap can help determine whether the design is contributing to the problem. A new, well-designed chimney cap could alleviate these issues, ensuring safer and more efficient operation for years to come.
1. What additional factors should be considered in chimney cap performance?
Consider whether the cap design allows snow to accumulate, as this can also contribute to creosote and soot buildup, impacting performance.
2. What diagnostic steps can be taken to determine the cause of creosote accumulation?
Inspect both the chimney cap and the flue to identify where the creosote buildup is more significant, helping to determine if the issue is related to cap design, airflow, or wood quality.
3. How does the design of the chimney cap influence creosote and soot accumulation?
Chimney caps with tight screen mesh spark arrestors are more susceptible to clogging, which can increase creosote buildup.
4. How do environmental conditions affect chimney cap performance?
Cold weather and strong winds can cause heat to be stripped from the chimney cap, leading to condensation of gases and the accumulation of creosote.
Inspect and Diagnose
First, inspect your chimney cap thoroughly. Use binoculars if necessary to get a clear view of the buildup. Look for signs of creosote, which can appear as black, crunchy chunks. It’s crucial to understand that the cold weather can cause smoke particles and creosote to cling to the metal surfaces, leading to blockages.
Maintenance and Cleaning
Regular maintenance is key. If you notice significant buildup, consider removing the screen from your cap, as these often become the coldest part and are prone to creosote accumulation. Without the screen, you may find less obstruction and better smoke draw.
The Best Option
The best option is completely removing and replacing the chimney cap with a new stainless steel custom chimney cap. Designed, cut, installed, and sealed, a new chimney cap will serve your home for decades. Creosote is simply too hard and dangerous to remove completely.
Ongoing Prevention
Remember, even with a new cap, regular inspection and cleaning of both the cap and the flue are essential. While the cap may never remain shiny and new, ensuring your liner is clean is a good indicator that you’re operating your wood-burning stove correctly. Consistent maintenance will help prevent excessive creosote buildup, reducing the risk of chimney fires and maintaining efficient operation.
By taking these steps and understanding the limitations of DIY cleaning, you ensure your chimney remains in optimal condition while prioritizing safety.
1. Is it necessary to have screens on chimney caps?
While some people choose not to have screens on their chimney caps, this is a matter of personal preference and may depend on specific maintenance or operational concerns. Screens can prevent debris and animals from entering but may affect airflow and require additional cleaning.
2. What is the impact of the type of wood burned on chimney maintenance?
The type and quality of wood burned, particularly its moisture content, significantly affect chimney maintenance needs. Using well-seasoned hardwoods helps minimize creosote buildup, promoting a more efficient and cleaner burn.
3. How much creosote buildup is typical after burning a certain amount of wood?
After burning approximately 3.5 cords of seasoned wood, it is typical to find less than a quart of creosote accumulation in the chimney. This amount suggests that the chimney has been functioning effectively, although the cap may require more frequent cleaning.
4. What are the expected results after cleaning?
After cleaning, it is normal for the chimney cap to darken over time due to soot and smoke. This discoloration is expected and doesn’t necessarily indicate a problem as long as the chimney liner remains clean.
5. How is the chimney cap physically cleaned?
Cleaning the chimney cap can involve manually dislodging it using a tool, such as a stick, to knock it off for easy cleaning. This process requires careful handling to ensure it’s done safely.
How Do Different Stove Types Affect Creosote Production?
When it comes to wood stoves, understanding how they impact creosote buildup can help you maintain a safer and more efficient heating system.
Efficiency and Flue Temperatures
Stoves vary in their efficiency, and this significantly affects flue gas temperatures. More efficient models, such as catalytic stoves, generally operate with lower flue temperatures. While this efficiency is beneficial for heat output, it can also lead to increased creosote formation. Because the exhaust gases are cooler, they are more likely to condense within the chimney, transforming into creosote.
Catalytic vs. Non-Catalytic Stoves
Catalytic Stoves: These stoves use a combustor to increase efficiency, allowing for a longer burn time at lower temperatures. However, the reduced flue temperature can enhance creosote deposition, especially if not operated at sufficiently high outputs.
Non-Catalytic Stoves: These tend to burn at higher temperatures and don’t rely on a catalyst for efficiency. As a result, the higher flue gas temperatures they produce can reduce the amount of creosote, as the hotter smoke is less likely to condense.
Operational Practices
Regardless of the type, operating your stove at higher outputs can help minimize creosote buildup. This practice enhances the flue temperature, reducing the condensation potential of smoke particles in the chimney. Regular maintenance and proper wood seasoning also play crucial roles in reducing creosote accumulation across all stove types.
In summary, while highly efficient stoves are excellent for heating purposes, they require careful operation to prevent excess creosote. By understanding these dynamics, you can choose and maintain a stove that balances efficiency with safety.
Understanding the Impact of Moisture Content on Creosote Buildup
When considering the factors that contribute to creosote accumulation in your chimney, the moisture content of your firewood is crucial. Let’s explore how it affects creosote formation and what steps you can take to ensure a clean burn.
The Role of Moisture Content
Optimal Moisture Levels: Properly seasoned hardwood should have a moisture content around 15-20%. This level allows the wood to burn efficiently and with sufficient heat output.
High Moisture Consequences: Wood with a moisture content above 20% is considered too wet for optimal burning. Wet wood struggles to reach the necessary temperature for complete combustion, producing excess smoke.
Low Moisture Benefits: Using wood within the ideal moisture range results in cleaner burns. More complete combustion means less smoke, which directly leads to reduced creosote buildup in the chimney.
The Connection to Creosote
Incomplete Combustion: When wet wood is burned, it cannot reach high enough temperatures to combust completely. This inefficiency leads to increased smoke and the release of volatile gases.
Increased Smoke Production: Smoke from wet wood is laden with unburnt particles that condense on cooler chimney surfaces, forming creosote.
Temperature Fluctuations: A fire burning with wet wood does not sustain consistent temperatures, promoting the accumulation of creosote, which happens more readily at lower temperatures.
Preventive Measures
Regular Monitoring: Use a moisture meter to check your firewood’s moisture content. Aim for readings between 15-20% for the best results.
Proper Storage: Stack wood to allow air circulation and cover it to protect from excess moisture, but ensure it’s not completely sealed off from air drying.
Chimney Maintenance: Regularly clean your chimney and cap to remove creosote buildup. This is essential even if you use properly seasoned wood.
By understanding and controlling the moisture content of your firewood, you can significantly reduce creosote buildup, ensuring a safer and more efficient heating experience.
Impact of Cold Weather on Creosote Buildup in Chimneys and Caps
Cold weather can significantly influence the amount of creosote buildup in both chimneys and caps. Here’s how:
1. Temperature Fluctuations:
Heat Loss: When winter temperatures drop significantly, and strong winds prevail, they tend to strip away the heat more quickly from the chimney cap. This rapid cooling causes gases within the chimney to condense faster, leading to increased creosote deposits.
2. Condensation:
Increased Moisture: The cold environment can cause moisture inside the chimney to condense, which mixes with the smoke. This combination results in sticky creosote creation that adheres more robustly to chimney walls and caps.
3. Combustion Efficiency:
Air Supply: If your chimney isn’t providing enough air for combustion, or if the wood you’re using isn’t sufficiently seasoned, the lower temperatures can exacerbate creosote accumulation. This is because cooler temperatures result in slower burning and more smoke production, both of which contribute to build-up.
Understanding these factors can help manage and mitigate the risks of excessive creosote buildup during colder months. Ensure proper air circulation and use well-seasoned wood to maintain an efficient and safe heating system.
The Role of Catalytic Stoves in Creosote Formation Compared to Non-Catalytic Stoves
When it comes to understanding creosote formation in catalytic versus non-catalytic stoves, there are significant differences to consider.
Catalytic Stoves
Catalytic stoves are designed to be highly efficient, burning wood at lower temperatures and utilizing a catalyst to ensure a more complete combustion process. However, this efficiency comes with a downside. The lower flue temperatures often associated with catalytic stoves increase the likelihood of creosote—a tar-like byproduct of burning wood—forming in the chimney. The cooler exhaust allows smoke particles to condense more easily, resulting in more creosote.
Non-Catalytic Stoves
On the other hand, non-catalytic stoves typically operate at higher temperatures. They rely on increased airflow and secondary combustion to achieve a clean burn. The higher heat helps to minimize creosote buildup because the smoke is less likely to condense as exhaust gases exit the stove and rise through the chimney.
Managing Creosote Formation
Operating Temperature: Running a catalytic stove at higher outputs can reduce the risk of creosote by raising the flue temperature.
Regular Maintenance: Regardless of the type of stove, regular chimney cleaning is essential to prevent creosote buildup, which can pose a fire hazard.
Proper Fuel Use: Using well-seasoned wood can minimize smoke production and reduce creosote formation in both catalytic and non-catalytic stoves.
In summary, while catalytic stoves offer high efficiency and environmental benefits, they require careful management to mitigate the increased risk of creosote formation compared to their non-catalytic counterparts.
Understanding Creosote Buildup with a Catalytic Combustor
Creosote buildup on a chimney cap can be perplexing, especially when using a catalytic combustor, which is designed to enhance efficiency and reduce emissions. However, several factors contribute to this issue.
Low Flue Temperatures: Catalytic combustors are known for their high efficiency, which can lead to consistently lower flue temperatures. When the flue is cool, the smoke doesn’t stay hot enough to exit quickly, increasing the likelihood of condensation. This condensation can cause tar-like substances in the smoke to stick to the flue and chimney cap.
Incomplete Combustion: Even with a catalytic combustor, if the fire isn’t burning hot enough, incomplete combustion occurs. This situation results in smoke laden with unburned particles, which easily condense in cooler areas, leading to creosote deposits.
Moisture Content in Fuel: Wood with a high moisture content can exacerbate the problem. When the wood isn’t properly seasoned, the extra moisture in the smoke tends to cool down the flue gases, contributing further to condensation and creosote accumulation.
Extended Low-Burn Settings: Operating at a low-burn level for extended periods can also be a culprit. While this is efficient for long-term heat output, it can cause the flue temperatures to remain below optimal levels, encouraging creosote formation.
To mitigate this, ensure your wood is well-seasoned, occasionally run the stove at higher temperatures to burn off deposits, and perform regular maintenance of your chimney system to minimize buildup risks.
The real truth behind gas fireplace logs will surprise you. Gone are the days of cheap looking gas log inserts. Vent free is here.
Gas fireplace logs offer the ease of use in turning them on and off with a switch. Also, the better quality gas logs operate with a remote control for setting room temperatures.
Ignition Control Options for Gas Logs
The ignition process can vary significantly depending on the controls installed in your fireplace. Some models feature a simple knob for manual operation, providing straightforward functionality. For those seeking more convenience, remote-controlled systems are available, allowing you to adjust settings with just a click.
Additionally, installation specialists can design ignition setups tailored to your lifestyle preferences, ensuring a seamless integration with your home environment. Whether you prioritize ease of use or advanced functionality, there’s a gas log ignition option to suit your needs.
Many times, old chimneys and flues become a maintenance headache for burning firewood. A professional chimney company can convert a wood burning fireplace into gas logs.
What is a vent free fireplace?
Simply put, a vent free fireplace is a self contained unit. It contains a metal shell called a firebox. It also has a burner (served by natural gas or propane) and the log set. The real truth behind gas fireplace logs is they do not require venting or a chimney.
Understanding How Gas Logs Work in a Fireplace
If you’re considering a fireplace upgrade, gas logs might be the perfect fit for your home. They deliver the cozy warmth of a traditional fire without the hassle.
What Are Gas Logs?
Gas logs comprise a set of ceramic logs and a system of pipes. These components can be integrated into various fireplace designs. The complex yet simple mechanism involves gas—either propane or natural—channeled through these pipes. The gas flows through tiny openings in the ceramic logs, producing a convincing flame when ignited.
Easy Ignition
Lighting a gas log fireplace is a straightforward process, unlike traditional wood-burning setups. Depending on your preference, you can ignite the logs using a manual knob or a convenient remote control. This flexibility ensures you can choose an ignition method that fits seamlessly into your daily routine.
Safety and Flame Containment
Safety is paramount when installing gas logs. Ensuring the area around the logs is flameproof minimizes risks. Installation may involve lining the fireplace with materials like lava rocks or sand, which contain the flames and prevent them from spreading. Some setups include glass panels for an additional layer of security. Once these precautions are in place, you can enjoy your new fireplace with peace of mind.
With this system, you get the instant allure of a flickering fire, perfect for cozy evenings or setting the right ambiance, minus the workload of traditional fireplaces.
We have another post on our site: How to Install Fireplace Inserts. This will help you understand more about conversions from wood to gas.
The installers mount vent free gas log fireplaces a wall. They also install logs in existing chimneys. Don’t forget the outside deck, hot tub area or barbecue pit area.
Is there preparation needed before you convert to a vent free gas log system?
The benefits are numerous for converting an existing wood burning fireplace to gas logs. Here are several benefits you will enjoy:
The top benefit of gas logs is no ash and soot to clean.
Remote control of the space temperature.
On and off times based on temperatures or time.
No chimney or fireplace to maintain.
Efficient burning of the natural gas or propane saves money.
Real fire look every time. No poking or moving logs around.
How about the cost of installing vent free gas logs?
Most vent free gas log installations and conversions are very affordable. As with any purchase, you get what you pay for in looks, convenience and energy use.
Understanding Gas Logs
A gas log system consists of ceramic logs and piping. These logs can be placed in various fireplace spaces, with the pipes channeling invisible gas through holes in the logs. When ignited, the ceramic logs produce a steady flame as propane or natural gas burns on their surface.
Installation Process
Before enjoying your gas log, it’s crucial to make the surrounding area flameproof. This may involve lining the fireplace interior with lava rocks or sand to prevent fire spread. Additionally, a glass panel can be installed for added safety. Once these safety measures are in place, your fireplace is ready for use.
Cost Considerations
Most installations range from $1,800 to around $4,500. Of course, the very high-end and large units can cost over $8,000. Remember, this is a one-time cost. Factor in the cost of wood, cleaning, maintenance, and safety to see the value of gas logs installed. All prices are going higher now due to the supply and demand of goods. Ask about used gas log sets or other alternatives to lower the install cost.
By understanding both the technical and financial aspects of gas log installations, you can make an informed decision that balances safety, aesthetics, and budget.
What secrets we use to make the gas log conversion look real?
Real fires produce ash and embers that glow as they burn. For instance, the smoldering embers on the bottom of the logs look real. Therefore, we use a man made ember that glows but does not burn up.
Volcanic rock and heat sand add additional “real fire” look to any gas log set. The key is proper placement in the log set.
What to watch out for – too many rocks or ash will clog the orifices. Also, the logs will scorch if done incorrectly.
Igniting gas logs is a straightforward process, offering convenience and ease that traditional wood fires can’t match. The method of ignition largely depends on the type of control system your fireplace features.
Manual Ignition: Some gas logs are equipped with a manual knob that you turn to release the gas, igniting the logs with a simple twist. This system is akin to lighting a gas stove.
Remote Control Systems: For those seeking more convenience, many modern gas logs can be activated using a remote control. This allows you to start the fire from anywhere in the room with a simple press of a button, adding a touch of modern luxury to your fireplace experience.
Wall Switches: Another popular option is a wall-mounted switch. This set-up enables you to ignite the logs with a flick of a switch, integrating seamlessly into your home’s electrical system.
Smart Home Integration: Cutting-edge designs even offer smart home compatibility, enabling you to control your fireplace using smartphone apps or virtual assistants like Alexa or Google Home.
When installing gas logs, a specialist will help select an ignition system that aligns with your lifestyle and preferences, ensuring safety and ease of use.
How to Make the Area Around a Gas Log Flameproof
Creating a flameproof environment around your gas log is essential for safety and functionality. Here’s how you can do it effectively:
Prepare the Fireplace Interior:
Line the interior of your fireplace with flame-resistant materials such as lava rocks or sand. These substances help contain the heat and prevent any potential spread of fire outside the designated area.
Install a Protective Barrier:
Consider adding a glass panel for an additional layer of safety. This barrier not only contains the gas log fire but also enhances the aesthetic appeal of your fireplace.
Consult with Professionals:
It’s advisable to have a certified installation technician perform these modifications. Professionals will ensure that all safety standards are met and provide peace of mind.
By taking these steps, you can enjoy your gas log fireplace knowing that it’s both beautiful and secure.
