Attention Mother Nature – PLEASE hold off Winter. My fireplace is not ready! Our busy season is rapidly approaching. Don’t risk your family’s safety. Call us to clean out that chimney and inspect it for issues. Now is the best time to clean your chimney!
One of the most frequently asked questions in our business is “how to burn wood in a fireplace”. A lot of us were taught in scouts or from our family and friends. Often, the skill is not totally the best.
Here are 9 key stages on how to burn wood in a fireplace.
Get an annual chimney check – Have chimneys inspected annually and cleaned as necessary. This reduces the risk of fires and carbon monoxide poisonings due to creosote build-up or obstructions in the chimney.
Keep it clear – Keep tree branches and leaves at least 15 feet away from the top of the chimney.
Build it right – Place dry, seasoned firewood or fire logs at the rear of the fireplace on a supporting grate using the following top-down fire method. Start by placing the largest pieces of wood on the bottom of the fireplace grate or wood stove, with the ends going front to back (opposite of what you were taught). This front to back method allows the air to mix well with the fuel. Place smaller wood on top with their ends going side to side. Keep alternating your rows of wood using smaller and smaller pieces until your wood is stacked about ½ the height of the fireplace. At this point you will begin placing your kindling (the smallest pieces of wood). Again, stack smaller and smaller pieces until there are simple wood shavings on top. The shavings on top should be small enough to light with a single match. As the fire burns from the top to the bottom, it will continue to ignite the wood below. Only a little smoke is created as the fire burns hotter and more cleanly from the top of the stack. Burning wood this way prevents smoke and unburnt gases from entering your cold chimney. This can potentially adhere to the chimney walls causing creosote.
Keep the hearth area clear – Combustible material too close to the fireplace or to a wood stove, could easily catch fire. Keep furniture at least 36” away from the hearth.
Use a fireplace screen – Use metal mesh or a screen in front of the fireplace to catch flying sparks that could ignite or burn holes in the carpet or flooring.
Install smoke and carbon monoxide detectors – Place detectors throughout the house and check batteries in the spring and fall. An easy way to remember to check: When you change your clocks for Daylight Savings Time, check your batteries.
Never have a fire in a fireplace unattended – Before turning in for the evening, be sure that the fire is fully extinguished. Supervise children and pets closely around wood stoves and fireplaces when in use.
Just when you thought you had heard it all – from another Darwin candidate – Soaking your firewood in diesel for an easy start and longer burn. This is what NOT to put in your fireplace!
You did read that right. A homeowner actually does soak their firewood in diesel before putting it in their fireplace. Now imagine not only the regular wood smoke going up the chimney but also the black diesel smoke mixing in and coating the chimney.
We recommend using small pieces of wood or kindling at the base of the firewood. These can be lit by small amounts of newspaper or a kindling starter. We never recommend pouring any type of fluid into a firewood stack for easy lighting.
We are often asked what not to put in your fireplace. Let’s go over them again.
Large amounts of newspaper beyond just starting the kindling.
ANY type of gasoline or diesel fuel.
Cardboard or other heavy paper products.
Wrapping paper or other paper made with coatings.
Garbage (enough said here)
Yard waste…really?
All of these various items can wreck havoc on your fireplace and chimney. That is why we advise folks what NOT to put in your fireplace often. The build up on the chimney plus the various burning embers can often start a chimney fire and/or tear apart the masonry inside your chimney.
What to burn in your fireplace?
So, what to put in your fireplace? Dry, clean seasoned wood. Local suppliers can deliver this type of wood. It is sold as a “cord of wood”. It is typically 4 feet by 8 feet by 4 feet when stacked. Some providers of firewood will provide more for the same price.
In conclusion, often it is not which type of wood BUT “what NOT to put in your fireplace” that will keep your family safe and your largest investment free of fire.
